lighted push button annunciator

Configuration 1 is a best-in-class VIVISUN annunciator with a full-face “ADS-B FAIL” legend and includes an illumination test pin and a connector plug. This solution meets the most basic requirements for pilot notification of an ADS-B Out failure.

Configuration 2 includes an internal Solid State Relay component, the illumination test pin and a connector plug. The normally closed drop-out relay will detect the loss of a discrete signal from the transponder or positon hardware. This solution eliminates the need for an external relay.

Configuration 3 includes an internal ARINC 429 Signal Converter component, the illumination test pin and a connector plug. The ARINC 429 converter is configured to the label and bit requirements of the Rockwell Collins TDR-94D transponder. This solution eliminates the need for an external signal converter box.

The table below shows the pre-configured part numbers with links to our online part configurator as well as PDF downloads of the part specifications.

 Preconfigured Part NumberTarget TransponderDescriptionDownload
1LED-50-17-HA1-E1VXBMultiple TranspondersAnnunciator onlyPDF
2LED-GM-17-HA1-E1WULACSS, GarminIncludes internal normally-closed drop-out relayPDF
3
LED-EM-17-HA1-PA00BRockwell Collins TDR-94DInternal ARINC 429 Signal ConverterPDF

Custom configurations also available for shipping in as few as 5 business days.

The 2020 deadline for the FAA mandate regarding ADS-B is fast approaching. Don’t wait, call us today.