2.4.1
Compact and High Capacity bodies have a solderless connector plug than can be separated from the body for ease of installation and wiring. A specially keyed version of the connector plug is required if a Compact or High Capacity body contain any NEXSYS® components. The specification of a body as: a) Standard Square vs. Large Rectangular or; b) unsealed vs. sealed has no impact on the solderless connector plug required.
Plugs can be ordered and delivered with the bodies or can be ordered separately.
|
Figure 2.4.1-A Solderless Connector Plugs (as seen from rear of switch) |
||
|---|---|---|
| Body Description |
Compact Body |
High Capacity Body |
| Bodies WITHOUT NEXSYS components |
P/N 18-200 |
P/N 18-240 |
|
Bodies WITH NEXSYS Components (Note: Missing key tab allows insertion in bodies containing NEXSYS components) |
P/N 18-442 |
P/N 18-440 |
| Pinout Description | ||
|
A, B,C, D, F, G: Cap Circuit Pins A 1-4, B 1-4: Switch pole or NEXSYS component pins |
A, B,C, D, F, G: Cap Circuit Pins H 1-4, J 1-4, K 1-4, L 1-4: Switch pole or NEXSYS component pins |
|
Solderless Termination
All connector plugs accept MIL-C-39029/22-192 sockets crimped onto 20, 22, or 24 gauge wire. Crimp sockets (P/N 18-219) are not provided with connector plugs.
Loading Wires
Wires with the MIL-C-39029/22-192 sockets crimped on are inserted into and extracted from the connector plug by use of a M81969/14-02 tool (P/N 18-216).
Mating the Solderless Connector Plug
No tool is necessary to plug the connector into the housing, but an extraction tool, P/N 18-234 is required to unplug the connector plug from the switch body.
Sealing Plug
Sealing Plugs, P/N 18-215, are provided with each connector plug. Sealing plugs should be inserted in each unused pinout location.
Weight of Connector Plugs
6 grams (0.21 oz).