3.1
NEXSYS Modules can accommodate 10 specific component combinations based on the Series of components specified as shown below. Modules have four positions (H, J, K and L), each with four pins. If a position is unused, no pins will be placed in those positions, therefore a module can have 4, 8, 12 or 16 pins. Series N and Series R components must be specified alone in a NEXSYS Module due to larger dimensions.
|
Figure 3.1.0.0-A |
|
|---|---|
|
|
| Series A only components |
|
| Series C components |
|
| Series N components |
|
| Series R components |
|